Waterproofing Paste 2.5KG


Total: £-

Baxboard™ Waterproofing paste is a liquid, low odour, water resistant polymer, which creates a flexible waterproofing layer in shower or wetrooms, prior to the application of ceramic, stone or porcelain tiles.


The surface must be solid, and free of oil, grease or dust. Small cracks should be filled with a cementitious filler, or acrylic sealant. Solvent based sealants must not be used for filling gaps. If necessary, a coat of Baxboard Primer should be used to seal the surface.

Stir paste before use. Apply using a brush or roller. Can be applied in 1 or 2 coats, to give a dry coat thickness of 0.5mm. When using a single coat, ensure the whole area is fully covered. Drying time is approximately 3 hours, depending on temperature and humidity. For sealing wetroom shower bases, the paste is used in conjunction with Baxboard Tape and preformed corners (see separate fixing instructions). For interior use only. All tiling work to be carried our in accordance with BS 5385 and sealant applied in accordance with BS 8000:16.


Must be protected form frost, and applied at temperatures above 5°C. Can be stored for up to 12 months before use.


The product is classified as non hazardous. It fulfils the highest VOC classification, EC1 plus. It is advised to wear protective gloves and goggles. If paste comes in contact with the skin, wash off with water. Clean tools with water. Keep out of the reach of children.

Baxboard Waterproofing Paste Data Sheet

Additional information


2.5 Kg



We are based in the North of England with depots in Newcastle and Manchester. We operate our own fleet of 15 tonne rigid curtain sided vehicles. Due to the bulky nature of insulation products, our wagons are quite high (typically up to 15’/4.5m) so please give consideration to any potential access problems our vehicles may have. The main problems we encounter are trees, narrow lanes and low bridges. Our drivers will assist with off-loading goods to the roadside or site adjacent to the wagon. Further movement of goods in houses and on site is the responsibility of the customer. Please ensure site has adequate means of off-loading goods safely and that there is someone on site to meet the vehicle. If orders need to be re-delivered then we reserve the right to charge to cover additional transport costs.


The postcodes included in our standard delivery area are to all addresses beginning with NE, DH,TS, BD, HG, LS, BB, PR, L, WN, BL, WA, BL, WA, M, CH, CW, SK, S, WF and OL. We also cover the following post codes: DG1, DG11, DG12, DG14, TD5, TD8, TD9, TD12, TD15, CA 3 to 6 incl and CA8, LA 1 to 7 incl, DL1, DL 3-7 incl, DL 14-17, YO 7-8, YO 10, YO19, YO24, YO26, YO30-32 incl, YO61, YO91, DN 1-8 incl, DN12, LL11-14 incl, LL17-19 incl.

Delivery is included free for orders over £250.00 (excluding VAT). For orders less than £250.00 + Vat a £25.00 + Vat carriage charge would apply.

For deliveries to other postcodes, please contact our sales office on 0191 257 8640 (Mon-Fri, 8am to 5pm) or e-mail us with your requirements on sales@tyneinsulation.co.uk and we will contact you to arrange a quotation.


Our normal lead time for deliveries is 2-4 days and our sales office will contact you to confirm and delivery date/approximate time prior to despatch.


Please contact our sales offices by telephone quoting your order conformation number. If goods are either picked and loaded or en-route then a cancellation charge may apply.

Make an enquiry

Get in touch with our team to enquire about our products and departments. Simply leave your details so we can phone you back and discuss to see how we can help you with your project.

Contact us

Brands we work with